Let's give you a popular science on how to maintain and maintain U Drill Bit .
1. When drilling steel parts, please ensure sufficient cooling and use metal cutting fluid.
2. Good drill pipe rigidity and guide rail clearance can improve drilling accuracy and drill life
3. Please ensure that the magnetic base and the workpiece are flat and clean.
4. When drilling thin plates, the workpiece should be reinforced. When drilling large workpieces, please ensure the stability of the workpiece.
5. At the beginning and end of drilling, the feed rate should be reduced by 1/3.
6. For materials with a large amount of fine powder during drilling, such as cast iron, cast copper, etc., you can use compressed air to help chip removal without using coolant.
7. Please remove the iron chips wrapped around the drill body in time to ensure smooth chip removal.
We are a professional Deep Hole Drill Manufacturers, welcome to visit our website!
Indexable drills offer significant advantages over conventional twist drills. With them, machinists can drill holes at faster cutting speeds, change cutting edges faster and, with the right insert sel...
A drill is a tool that is attached to the drill chuck (the rotating part). When the drill bit is pressed into the surface, it creates a borehole by removing material in front of it. Different drill bi...
Carbide drills have largely replaced high-speed steel (HSS) drills in the industry. Before 2000, the market share of cemented carbide and high-speed steel drills was about 50-50. The market share of H...
A U-Drill is a drilling tool with carbide inserts that can be easily and inexpensively replaced, a common U-Drill looks like this. Understanding the basics of hole making tools are those cutting tools...
A deep hole is defined by its depth-to-diameter ratio (D:d), typically a hole greater than 10:1 is considered deep. Metal deep hole drilling has a wide range of applications across multiple industries...
There are three traditional deep drilling methods: gun drilling, single tube system (STS) and double tube system (DTS, also called Ejector system). Is it necessary to start with a pilot or starter hol...
Ningbo Rongke Maite NC Tool Co., Ltd. is wholesale deep hole drills manufacturers. Company has been concentrating on researching and producing hole making tools, we have technology cooperation with many universities.
English
中文简体
